Although everyone rides a motorcycle every day, there are many things on the motorcycle that we may not often notice, and even some owners do not know that there are these designs, but some of these ignored designs are exquisite, and the following Xiaobian will introduce some to you.

1, light distance adjustment hole;

Many owners think that the motorcycle light distance can only rely on the dimmer switch, if the dimmer switch generated by the distance is not satisfied, there is no way, in fact, there is a adjusting screw hole on the motorcycle, with a screwdriver can be adjusted, straddle easy to do, just below the headlights, and the scooter is generally in the front inner box inside, as shown above.

2. Parking locking mechanism;

If the motorcycle is parked on the slope of the road, it will slide, causing the vehicle to overturn, so a manual parking lock mechanism is designed in the Honda series of pedals, as long as the parking hand is pressed, the motorcycle will not move, which plays the role of the handbrake equivalent to the car. See the picture above.

3, USB interface;

With the development of The Times, many motorcycles are now generally equipped with USB interfaces, which can facilitate mobile phone charging, especially for mobile phone navigation owners have a very convenient role, as shown in the figure above.

4. Oil spill hole;

The function of the oil spill hole is that when refueling, if the oil spill phenomenon occurs, the spilled gasoline will flow along the oil spill hole to the tail of the motorcycle, and will not let the gasoline overflow on the motorcycle body, especially on the engine, so as to avoid the occurrence of fire.

5, carbon tank;

The carbon tank was originally a gasoline anti-evaporation device enforced by the three emission standards of the motorcycle country, but this device actually solves many problems of the motorcycle, first of all, to prevent gasoline from evaporating and polluting the air. Secondly, it can extend the time of gasoline gelation, and once the car of the second country has not been ridden for a long time, the gasoline can not be used, and after the carbon tank, the time of gasoline deterioration will be extended a lot. Finally, it can also play a role in fuel saving, because the carbon tank can recover the evaporated oil and gas, and when the motorcycle is used, the oil and gas can be collected to participate in the combustion.

6, filter blowdown pipe;

There are many owners always see a lot of pipes behind the motorcycle, but do not know what to use, in fact, this is an important design to keep the air filter clean and smooth, the air contains a lot of water steam, in addition, the motorcycle in the transportation process, or the motorcycle oil supply system has a failure, but also let the motorcycle from the crankcase back some oil to the air filter, The sewage pipe will collect this sewage or waste oil, and when it is full to a certain extent, it can be pulled out and dumped. Do not let this pipe go straight through!

7, stop screw;

As long as it is a regular motorcycle brand, the screws of the front and rear axles are stop nuts, as long as they are tightened, they will not be loose, so as to avoid driving accidents, so the owner must check whether his front and rear spindle nuts are stop nuts when buying a car, because there are many irregular products do not use stop nuts.

(Text from the network, infringement please contact delete)