Why change the oil, that's a good question. Oil has several important roles in the engine, of which lubrication is one of the most important roles, there is a need for metal components inside. If there is no oil lubrication and protection, all mechanical movement will soon cause the engine to destroy because of the high temperature generated by friction, in addition, the oil in addition to lubrication and cooling.

For the replacement of motorcycle oil, unlike the car, the oil is dirty is one of the replacement standards for most riders, but it is easy to miss the replacement cycle if the oil is dirty to determine whether it needs to be replaced, for example, now entering winter, many riders in the north have already been in storage, it is necessary to thoroughly maintain before entering the storage. Next year, you don't have to think about last year.

Before changing the oil, we need to prepare some tools and materials. Including oil, oil filter, gloves, dipstick, etc. Among them, oil is essential, because it is the "blood" of the motorcycle engine. We also make sure that the oil we use is suitable for our motorcycle model, 10W30 or 10W40, and there is no mistake in using the original oil as the standard.

Follow these steps to change the oil

Open the oil cap. This step may seem simple, but it is important to note that the position of the oil cap may vary depending on the model of motorcycle. Generally, it is located on the bottom or side of the motorcycle. Once found, gently open it with the appropriate tool. Remove the old oil. Pay attention to safety during this process to avoid oil splashing on the body or in the eyes.

Install a new oil filter. After removing the old oil, we need to install a new oil filter. This step is also very simple, just follow the instructions of the filter to install it. It should be noted that the position of the filter should also be correct, and at the same time apply some oil to the position of the oil filter seal ring to ensure the sealing effect of the oil filter.

The last step is to add the new oil. We need to use a dipstick or tubing to add the new oil to the designated location. In general, the amount of new oil added will be determined according to the model of the motorcycle and the capacity of the engine. And record the date and mileage of replacing the oil and filter for the next replacement.

To sum up, changing the oil of your motorcycle yourself is a very practical skill. It not only allows us to better maintain our motorcycles, but also allows us to know more about our motorcycles. If you have not mastered this skill, then you may wish to give it a try, I believe you will have a new experience besides riding.

(Text from the network, infringement please contact delete)