What is the main function of the motorcycle clutch?

First of all, we need to know that the clutch is to help the vehicle to start smoothly and shift smoothly, so the performance of this device will directly affect the power performance of our vehicle

Under normal circumstances, the clutch of the motorcycle will slowly become loose, but some owners ride more and more tight phenomenon, what is the reason, we will take a look at today.

Problem 1: Rocker arm rust

Because the engine clutch rocker arm lacks lubrication, rust occurs during use, and once rust occurs, it will affect the smooth aftertaste of the clutch and the normal shift performance.

Problem 2: The friction plate is damaged

If the operation is unreasonable in the later use process, it will damage the clutch friction plate, and once the friction plate damages the free travel of the clutch, it will have a hard feeling.

Problem 3: Cable pulling problem

For the motorcycle at this stage, its operating mechanism is mainly based on the cable, although the reliability of the cable will be relatively high, but it also has a service life, which in addition to direct fracture, the most likely to occur is the internal steel wire rope fork, in this state will affect the normal sliding performance of the cable, and many motorcycle clutches harden. Is directly related to this reason.

The way to troubleshoot this problem is actually relatively simple,

It doesn't cost much, if you have some hands-on skills.

The first thing we need to do is re-adjust the clutch,

First loosen the clutch properly,

To see if it returns and separates well,

If the improvement is due to the third factor,

There are two ways to solve this problem.

It should be noted here that the direction of the cable must refer to the original car, if the direction of the cable is changed, it will have a greater impact on the control and use of the vehicle, mainly because the wire rope, with the change of the direction of the cable will become less smooth.

If the reason is excluded, that is, the clutch rocker arm is rusty, at this time we need to remove the clutch side cover, through heating treatment to remove the clutch rocker arm for grinding, as long as the clutch rocker arm can easily rotate in the shell, then after replacing the oil seal, in the application of an appropriate amount of high temperature grease, this failure can be solved.

(Text from the network, infringement please contact delete)