CN EN
EN
CN EN
market dynamics
How to adjust the shock absorber of the motorcycle, so that the car is more suitable for you
Release date:2024.10.17

Preparations for adjusting suspension:


Find the original user manual. This booklet includes:


1. What you can adjust;


2. Adjust the position of the screws and knobs of the front and rear suspension;


3. Manufacturer's recommended suspension Settings (if you are using a modified suspension such as Ohlins, you will need to contact the manufacturer to obtain the recommended suspension Settings data) This is very useful information.



Adjustment of front shock absorber:


The front shock absorber is hydraulic inside, so it cannot be adjusted outside. But you can do this: after the shock absorber is removed, the shock absorber oil inside is released 10 ml, do not put more than it will become soft. Of course, the released shock absorber oil needs to be put in place if it is adjusted too soft and then back some, the removed shock absorber can be used to press it down, feel it can be installed on the car, remove the shock absorber needs a lot of tools you have to prepare, you need to use a wooden stool under the engine to support, and then remove the shock absorber, you also have to pay attention to the shock absorber inside a spring. It's not used to adjust the shock absorber, so don't move.


But this has a certain risk, it is easy to damage the shock absorber.



Adjustment of rear shock absorption:


Generally, there is an adjustment ring at the bottom of the shock absorber, which has a clip of different height, and the different hardness can be adjusted with a special hook or screwdriver. The more the spring is compressed, the harder the shock absorber is.


Insert a screwdriver into the circular hole at the position of the arrow below. It can be adjusted to the left and right. The shock absorber deeper than the bump will be soft, and the body will be low at the softest point.



The suspension of a motorcycle can greatly affect the handling and stability of the motorcycle when turning. Absorb the vibration brought by the rough road surface, while ensuring that the tire contact with the ground, to ensure that the tire power output to the ground. Good tuning can make the handling and comfort more suitable for you.

(Text from the network, infringement please contact delete)