1. Rearview mirror

Many small partners choose the rearview mirror first consideration must be how good the look, the lens is not big enough, will not shake, positioning is reliable. But it is easy to ignore whether there is a glue layer inside the lens.

Of course, this design is not good to distinguish from the shape, but people do not know the money, I can be very responsible to tell you that the absolutely cheap rearview mirror must have no rubber layer, the reason is very simple, with and without do not affect sales, and can also reduce costs. Most of all, many riders will not pay attention to this point.

However, it will affect later use, and it will also involve driving safety. The role of the rearview mirror lens adhesive layer in addition to anti-shake is to avoid secondary damage after the lens is broken.

Because there is no rubber layer after the lens is broken, it will be fragmented on the road, which is more dangerous for rolling and sliding personnel, and with the rubber layer, the lens will not be separated from the rearview mirror even if it is broken, and even if it is separated, it will not be made all over the ground. So don't be cheap when choosing a rearview mirror.

2. High pressure cap (burner)

For this part may be more unfamiliar to most partners, because some models of high pressure cap will not be exposed to the outside, and its replacement frequency is not high, some motorcycles to the scrap period is not necessarily changed.

However, there are exceptions to all things, because the frequent rain or moisture or puncture, then the fire nozzle is also very easy to work with illness or completely damaged.

The symptoms of this part are mainly presented as the engine leakage sound, starting difficulty, riding fire break, etc.

Once there is such a phenomenon, then we should first suspect that the problem is the high pressure cap. However, during the replacement process, it must be noted that the qualified high voltage cap must have resistance, if you choose inferior products, it will be easy to damage the spark plug, so if your spark plug often fails for unknown reasons, the high probability is the problem of the high voltage cap.

3. Handle (small handle)

This part should not be unfamiliar to anyone, because as long as you ride a motorcycle every day will be in close contact with it, but if we accidentally fall off the car, its small round head is very easy to break.

Some people call this fracture unreasonable design and poor quality. But in fact, the real reason here is that the manufacturer intentionally designed it, of course, not to make money, but to protect the handle function from loss.

Imagine that its strength is higher, then the associated handle seat will certainly be injured, if the handle seat is broken, then even the opportunity to continue to make do with it is no longer available, so if two must have one injury, then it must be the handle.

Of course, some small partners said that instead of letting it break, it is better to enhance the toughness to make it deformed, this design idea is also on the early model, but the consequence of the deformation of the handle is that its functionality will be weakened, the separation is not separated, the brake is not braking, although it can be used but the effect is minimal.

So now many vehicle manufacturers choose the handle are reserved for "break marks", once the rollover force it will break in the right position, so although it will affect the beauty, but at least you can continue to use, even if you do not replace it can persist, because it will not change the function that should be. So the second replacement must pay attention to this point.

(Text from the network, infringement please contact delete)