Motorcycle maintenance, first of all, we should pay attention to the maintenance of the new car run-in period, although the processing surface of the new car parts meets the processing accuracy requirements, but compared with the run-in, it is still relatively rough, the assembly gap is small, the contact surface is uneven, and the parts are in the high-speed wear stage at this time. During the movement of friction off more metal chips, resulting in higher surface temperature of motorcycle parts, lubrication effect is poor, in order to reduce the initial wear speed of parts, extend the service life, so motorcycles have a running-in period, generally 1500km.

In addition to the use of the running-in period according to the instructions, but also to comply with the following rules:

1, can not use a gear or a speed for a long time.

2, try not to drive at high speed, especially for a long time, the speed is generally not more than 40km/h;

3, should avoid full throttle open;

4, do not let the engine drive in the super load, to avoid overheating the engine;

5, the new car after 300km, should be replaced in time, and clean the oil filter.
(Graphic from the network, infringement please contact delete)