Cleaning the carburetor is usually to clean and dismantling, because such cleaning effect is obvious, but apart wash clean will also have some disadvantages, such as improper operation will change the liquid surface height, the liquid surface height once appear change, burning of the vehicle state will change, so the user can also choose from an external cleaning.

Carburetor cleaning from the outside of the operation method is relatively simple, as for the effect if the operation is appropriate is also relatively obvious, knight share to plunger carburetor as an example, briefly discuss the carburetor cleaning operation steps.

1. Start the vehicle. If the motorcycle is in the state of cooling, it is better to preheat it.

2. Air filter. Remove the connection between the air filter and carburetor.

3. Start cleaning, start the vehicle using cleaning agent in the carburetor inlet two inlet, appropriate injection of cleaning agent, and improve the engine speed, as far as possible to keep the engine running.

This operation it is worth noting that can be a little spray into the cleaning agent for cleaning for many times, if the injection cleaning dosage is too large, the engine will be easy to stall, and then you can through the method of instantaneous speed, the cleaner burning all clean, white gas exhaust pipe will pop up a lot at this moment, so the work of cleaning the carburetor after operation is finished.

The above is the method of cleaning without dismantling carburetor with cleaning agent. The operation condition of this method is that the filter connector can be easily removed and all the dust outside the carburetor needs to be cleaned. After these two prerequisites are met, the carburetor can be cleaned without dismantling.